Configuring Your Pc's Ip Address; Assigning An Ip Address To Your Pc Automatically By Dhcp; Windows Xp - Paradyne 6210 User Manual

2. Hardware Installation and PC Setup

Configuring Your PC's IP Address

Before you start to access the modem using the Ethernet or USB connection, you
must configure your PC's TCP/IP address to be 192.168.1.x, where x is any
number between 2 and 254. The subnet mask is 255.255.255.0.
Your modem's default IP address is 192.168.1.1.

Assigning an IP Address to your PC Automatically by DHCP

To use the CPE's DHCP feature, click in the radio button labeled "Obtain an IP
address automatically" instead of "Use the following IP address" in the following
procedures.
By default, the LAN port IP address of the modem is 192.168.1.1. You can change
this address, or another address can be assigned by your ISP.

Windows XP

To configure the IP address under Windows XP:
Procedure
2-6
1. In the Windows task bar, click on the Start button, and then click on Control
Panel.
2. Double-click on the Network Connections icon.
3. In the LAN or High-Speed Internet window, right-click on the icon
corresponding to your network interface card (NIC) and select Properties.
(Often this icon is labeled Local Area Connection). The Local Area Connection
dialog box is displayed with a list of currently installed network items.
January 2005 6210-A2-GB23-00