Binding the Filter
8000-A2-GB21-20
On the IP Network screen, indicate whether you want to use the filter you have
just defined on the IP Filter Configuration screen as an input filter or an output
filter for a specific interface on the MCC or DSL card.
NOTE:
When using the default input filter names, you do not need to complete a
worksheet. The default filter names are already bound to their corresponding
interfaces, and no further action needs to be done.
However, you will need to complete the following worksheet if you:
— Changed the default input filter name(s) on the IP Filter Configuration
screen, or
— Defined an output filter and that filter needs to be bound to a specific
interface
Access the . . .
IP Network screen
November 1997
IP Filtering Configuration Worksheets
By . . .
Selecting Configuration
Interfaces
from the appropriate menu (HotWire – MCC menu
or the HotWire – DSL menu).
IP Network
B-7