Paradyne 8540 Network Configuration Manual page 102

8000-A2-GB21-20
Static Routes Screen
Prompt
3. Do one of the following:
– To create a default route, enter
0.0.0.0 at the Subnet:
(nnn.nnn.nnn.nnn): prompt, or
– To create a source route, enter a
host or subnet mask at the
Subnet:(nnn.nnn.nnn.nnn):
prompt.
4. Do one of the following:
– When creating a default route, enter
the IP address of the default route at
the Next Hop IP Address
(nnn.nnn.nnn.nnn): prompt, or
– When creating a source route, enter
the IP address of the source route at
the Next Hop IP Address
(nnn.nnn.nnn.nnn): prompt.
5. Enter a number at the Input
Number: prompt to specify the
measurement of preference for this
route over other routes for the same
destination.
1 has the highest preference. The
greater the number the lower the
preference.
6. Enter dst or src at the Source
(Src)/ Destination(dst):
prompt.
7. Enter no or press Return at the
yes/no: prompt to keep the NO value
under the PA (proxy ARP) column.
8. When the system highlights Save
Changes?, enter yes at the yes/no:
prompt.
November 1997
Network Configuration Worksheets
Your Configuration Setting
Subnet Mask =
Next Hop =
Pref=
S/D=
PA= no
A-E-A
A-23