Paradyne 8540 Network Configuration Manual page 71

Hotwire dslam for 8540 and 8546 dsl cards
Hide thumbs Also See for 8540:
Table of Contents

Advertisement

SNMP Agent
8-2
The HotWire DSLAM supports the following MIBs:
MIB II — System Group (described in RFC 1213)
MIB II — ICMP Group (described in RFC 1213)
MIB II — UDP Group (described in RFC 1213)
MIB II — Transmission Group (described in RFC 1213)
MIB II — SNMP Group (described in RFC 1213)
MIB II — Definitions of Managed Objects for the Ethernet-like Interface Types
(described in RFC 1398)
MIB II — Definitions of Managed Objects for the Link Control Protocol of the
Point-to-Point Protocol (described in RFC 1471)
MIB II — Definitions of Managed Objects for the IP Network Control Protocol
of the Point-to-Point Protocol (described in RFC 1473)
MIB II — Evolution of Interfaces Group (described in RFC 1573)
MIB II — Ethernet Interface MIB (described in RFC 1643)
Entity MIB (described in RFC 2037)
Paradyne DSL Enterprise MIBs:
— HotWire System MIB (hot_sys.mib)
— HotWire xDSL MIB (hot_xdsl.mib)
— Security MIB (devSecurity.mib)
— Device Health and Status MIB (devHealthAndStatus.mib)
— DHCP Relay Agent MIB (hot_dhcp.mib)
— HotWire 5446 RTU Traps MIB (trapdefs.mib)
November 1997
8000-A2-GB21-20

Advertisement

Table of Contents
loading

This manual is also suitable for:

8546Hotwire dslamж

Table of Contents