Management Domain Components - Paradyne 8540 Network Configuration Manual

Hotwire dslam for 8540 and 8546 dsl cards
Hide thumbs Also See for 8540:
Table of Contents

Advertisement

Management Domain Components

8000-A2-GB21-20
5446 RTU Proxy ARP
The HotWire 5446 RTU utilizes proxy ARP to enable connectivity between end
systems that are attached to separate RTUs, but reside on the same subnetwork.
The HotWire 5446 RTU will proxy ARP for the end-user system that is physically
connected to another HotWire 5446 RTU where the destination end-user system
is logically connected to the same subnetwork as the sender end-user system.
The following illustration shows the components of the network management
domain. Note that the router between the MCC card's 10BaseT interface and the
DCE Manager is optional. The MCC card, as previously noted, provides
consolidated management for the DSL cards and HotWire RTUs from remote
network management workstations by means of SNMP, telnet, or by local access
through its VT100-serial interface.
Router
135.1.3.254/255.255.255.0
135.1.2.1/255.255.255.0
10BaseT
135.1.3.3/255.255.255.0
8540 DSL Card
RTU1
DSL Port 1
RTU2
DSL Port 2
RTU3
DSL Port 3
RTU4
DSL Port 4
November 1997
Components of the Network Model
Ordinarily, when DCE Manager
*
DCE Manager
*
is on a separate subnetwork, it
will not be in the 135.1.3 or
135.1.2 subnetwork.
135.1.2.2/255.255.255.0
MCC Card
135.1.3.1/255.255.255.0
Backplane
135.1.3.2/255.255.255.0
8546 DSL Card
DSLAM
RTU1
DSL Port 1
135.1.3.4
RTU2
135.1.3.5
DSL Port 2
RTU3
135.1.3.6
DSL Port 3
RTU4
135.1.3.7
DSL Port 4
97-15464-02
4-5

Advertisement

Table of Contents
loading

This manual is also suitable for:

8546Hotwire dslamж

Table of Contents