Mcc Card - Paradyne 8540 Network Configuration Manual

MCC Card

8000-A2-GB21-20
HotWire 8800 DSLAM chassis
The HotWire 8800 DSLAM is a 20-slot chassis designed to house up to
18 DSL cards and one MCC card. (The remaining slot is reserved for future
use.) The HotWire 8800 DSLAM chassis requires one MCC card and at least
one DSL card.
For information about the HotWire 8800 DSLAM chassis, see the HotWire
8800 Digital Subscriber Line Access Multiplexer (DSLAM) Installation Guide .
The MCC card is a single resource in the HotWire DSLAM that provides
consolidated management access for the DSL cards and the HotWire RTU from
any one of the following:
SNMP management systems, such as HP OpenView with Paradyne's DCE
Manager (via the MCC card's Ethernet port),
Remote telnet sessions (via the MCC card's Ethernet port),
Local asynchronous terminal (via the MCC card's VT100 serial port), or
Remote asynchronous terminal connected to a modem (via the MCC card's
serial port).
November 1997
Introduction to the HotWire DSLAM
1-5