Table of Contents
Advertisement
Preventing Unauthorized Access
Use the SNMP Security screen to enable SNMP security (i.e., prevent
unauthorized managers from browsing or configuring the HotWire DSLAM
network).
8000-A2-GB21-20
If address security is to be activated, it should be activated on the MCC and
all DSL cards.
If the NSP wants to allow an ISP or customer access to a limited set of DSL
cards, that NMS's IP address should only be entered on those DSL cards in
the limited set.
Access the . . .
SNMP Security screen
NOTE:
The following screen is the SNMP Security screen from the HotWire – DSL
menu. The SNMP Security screen from the HotWire – MCC menu is not
shown. Note, however, the HotWire – MCC SNMP Security screen does not
show the bottom half of the screen (i.e., the RTU security section).
November 1997
SNMP Configuration Worksheets
By . . .
Selecting Configuration
SNMP
(A-F-A) from the HotWire – MCC menu if
configuring the MCC card.
Selecting Configuration
SNMP
(A-F-A) from the HotWire – DSL menu if
configuring a DSL card.
Security
Security
C-5
Advertisement
Table of Contents
