Understanding The Domain Types - Paradyne 8540 Network Configuration Manual

Introduction to the HotWire DSLAM

Understanding the Domain Types

1-16
Functionally, the HotWire DSLAM network model can be divided into:
Features supporting customers
Features integral to supporting customers are the DSL cards and HotWire
RTUs.
Features supporting overall system management
The central point of access for overall system management is the MCC card.
However, the features integral to supporting overall system management are
also distributed throughout the HotWire DSLAM and the HotWire RTUs.
To monitor and control the operation of the overall system, the IP addresses of
the HotWire DSLAM and the HotWire RTU must be partitioned into two distinct
domains.
Service domain(s)
The service domain (also known as the NSP domain) resides in a mutually
exclusive domain from that of the management domain. (There should be
one service domain for each NSP served by the HotWire DSLAM.) One
service domain encompasses an NSP and all of the end-user systems that
subscribe to that NSP.
For more information about the service domain, its features and components,
see Chapter 2, Service Domain Features ,
Network Model .
Management domain
The management domain resides in a mutually-exclusive domain from that of
the service domains. The NAP provisions IP addresses for the management
domain.
For more information about the management domain, its features and
components, see Chapter 3,
Components of the Network Model
For more information about assigning IP addresses, see Chapter 5,
Allocation .
November 1997
and Chapter 4,
Management Domain Features
.
Components of the
, and Chapter 4,
IP Address
8000-A2-GB21-20