TASK 2: Clear NVRAM
On the Clear NVRAM screen, clear the non-volatile RAM if the Who Am I screen
does not appear after power up (in Task 1) by entering yes at the Initialize
NVRAM: yes/no prompt.
8000-A2-GB21-20
NOTE:
An answer of yes causes the loss of all static configuration information. Any
changed parameters will return to default values, including user accounts,
filtering information, interface configurations, and port configurations.
Access the . . .
Clear NVRAM screen
November 1997
Network Configuration Worksheets
By . . .
Selecting Configuration
Card Status
Clear from the HotWire – MCC menu.
NVRAM
A-5