Table of Contents
Advertisement
Network Configuration Worksheets
You will need to assign a set of domain names that correspond with the already
configured Ethernet IP addresses (e1a interface) for the service domains on the
Domain Names screen.
The domain names are numbered 1 through 16 in the order in which they are
entered on this screen. Search for the domain name you want to configure for
dynamic IP addressing. Remember the number (1 – 16) for the specific domain
name you want to configure. You will need to configure the DHCP relay agent for
the domain name on the appropriate Servers screen (either Servers 1-8 or
Servers 9-16). For example, if you want to configure the fourth domain name on
the Domain Names screen, then you will need to configure that domain on the
Servers 1-8 screen.
In addition, for each port that has a DHCP end user, you should configure a
default domain in the Default DHCP Domain Index field. In this field, enter
the number associated with a configured DHCP server that you want to specify
as the default domain.
8000-A2-GB21-20
November 1997
A-25
Advertisement
Table of Contents
