Table of Contents
Advertisement
TASK 6: Reset the MCC Card
8000-A2-GB21-20
After configuring the MCC card for the management domain, reset the card to
install the configuration setting. On the Card Reset screen ( Configuration
Status
Card Reset) , reset the MCC card by entering yes at the yes/no:
prompt.
NOTE:
After resetting the MCC card, select a DSL card to continue with the
management domain configuration. To select a DSL card:
— Press Return to display the top-level menu (HotWire Chassis menu).
— Select Card Selection from the HotWire Chassis menu.
The Card Selection screen appears.
— Verify that the DSL card you want to configure appears on the Card
Status screen.
— At the Goto Card (M for MCC or slot# for DSL): prompt,
enter the number of the slot. Then, press Return. For example, if you
want to configure the DSL card in slot 4, enter 4.
The HotWire – DSL menu appears.
November 1997
Network Configuration Worksheets
Card
A-11
Advertisement
Table of Contents
