Network Configuration Worksheets
TASK 4: Create a Default Route or Source Route
A-22
On the Static Routes screen, create a default route or source route for each DSL
card (upstream direction). If creating a default route, fill out one worksheet. If
creating source routing, complete one worksheet per domain (up to 16 domains;
four domains per port).
Access the . . .
Static Routes screen
Static Routes Screen
Prompt
1. Enter 0 or press Return at the Item
Number (0 to add new
record): prompt to add a new
record.
2. Do one of the following:
– To create a default route, enter
0.0.0.0 at the Destination (or
space to delete route):
prompt, or
– To create a source route, enter the
source route address at the
Destination (or space to
delete route): prompt.
November 1997
By . . .
Selecting Configuration
IP Router
Routes from the HotWire – DSL menu.
Your Configuration Setting
Host/Net =
Static
A-E-A
8000-A2-GB21-20