Designating The Default Gateway - Paradyne COMSPHERE 6700 Series Network Configuration Manual

Custom Network Interface Settings

Designating the Default Gateway

5-8
4. Enter the appropriate dial settings.
NOTE:
Leave the Dial field blank to indicate Answer mode when connected.
5. Choose OK.
Table 5-5. Dial Settings Dialog Box Fields
Field
Dial
Timeout If Not Connected
In
Redial After Timing Out
Redial After Carrier Is Lost
Signal When Connected
Open Log When
Connecting
Use Default Gateway... to specify which gateway (router) should receive
communication destined for addresses in an unknown subnet. Refer to the NEWT
TCP/IP for Windows Installation and User's Guide.
February 1998
Description
Telephone number to use when dialing.
Number of seconds to wait for connection before timing
out.
Redial after a timeout occurs.
Redial after the carrier is lost.
Signal when connected.
Open a log when connecting.
6700-A2-GB22-20