Changing Network Configuration Of Installation Server - Nortel Media Gateway 3500 Installation, Operation And Maintenance Manual

15.3.1.3

Changing Network Configuration of Installation Server

If you change network configuration of the Installation Server (it's IP address, netmask or
default gateway) you must re-configure installed Solaris OS images.
To re-configure installed Solaris OS image, take these steps:
Connect to the Install Server via Telnet or RS232 console
At the prompt type the following commands
cd /jumpstart/Solaris_8_202_v1.0/Solaris_8/Misc/flash_config
./configure.pl all
cd /jumpstart/Solaris_9_904_v1.0/Solaris_9/Misc/flash_config
./configure.pl all
Installation, Operation, Maintenance Manual 166
Media Gateway 3500
Document # LTRT-90704