Status Leds - Nortel 2332 Installation Manual

28 AP overview

Status LEDs

The AP has LEDs that provide status information of the device.
describes the LEDs.
Figure 3. Health and Radio LEDs—Series 2332 access point
Table 1: Access Point LEDs—Series 2332 access point
LED Appearance
Health Solid green
Solid amber
Alternating green and
amber
NN47250-307 (324136-A Version 01.03)
Radio 2 LED
Health LED
Meaning
All the following are true:
•
•
•
•
AP is waiting to receive boot instructions and a
configuration file from a WSS.
AP is booting and receiving its configuration file from a
WSS.
Figure 3 shows the locations of the LEDs.
Radio 1 LED
Management link with a WSS is operational.
AP has booted.
AP has received a valid configuration from a WSS.
At least one radio is enabled or is in sentry mode.
Table 1