Table of Contents
Advertisement
AP technical specifications
This appendix lists the technical specifications for the Nortel Series 2332 access points.
compliance specifications.
tions.
Table 10 on page 130
(For specifications for the WSS, see the Nortel WLAN-Security Switch 2300 Series Configuration Guide.)
Note.
The Series 2332 access points are designed and approved to be used only with
Nortel WLAN—Security Switch (WSS) models 2360/2361, and 2350. (The 2380 and 2382
do not directly connect to the AP.)
Note.
The AP radios are disabled by default and can be enabled only by the system
administrator using the WLAN Management software application or the WSS's
command-line interface (CLI).
Note.
The radio frequency band, operating channels, and transmit power depend on the
country of operation specified by the system administrator using WLAN Management
software or the WSS's CLI. In addition, the Series 2332 access points are region locked to
only operate in their approved regulatory domain. If the country of operation entered into
the switch does not match the region loaded into the AP at manufacture, the AP will not
operate.
Table 6: AP Mechanical and Compliance Specifications
Specification
Size
Weight
Operating Temperature
Storage Temperature
Humidity
Power over Ethernet (PoE)
Table 7 on page
128,
Table 8 on page
lists the MAC address allocation scheme.
Description
Diameter: 16.76 cm (6.6 inches)
Height: 6.1 cm (2.4 inches)
Without mounting bracket: 0.45 kg (16 ounces)
With mounting bracket: 0.5 kg (17.5 ounces)
0° C to +50° C (32° F to 122° F)
-20° C to +70° C (-4° F to +158° F)
10% to 95% noncondensing
42 VDC to 57 VDC (46 VDC nominal)
IEEE 802.3af
Nortel WLAN Series 2332 Access Point Installation Guide
Table 6
129, and
Table 9 on page 129
127
lists the mechanical and
list the radio specifica-
Hide quick links:
Advertisement
Table of Contents
