e
Pull on the lock to verify that it is secured to the AP.
f
Remove the key.
10 Lift the AP into place on the universal mounting bracket as shown in
Make sure the cable feeds properly into the ceiling as you lift the device, and does not become trapped
between the access point and the bracket.
Figure 19. Step 9—Placing the AP on the Bracket
11 Lock the AP onto the bracket by inserting the 3-mm or 1/8-inch screwdriver into the Lock hole on the
access point as shown in
Caution!
locked onto the bracket before releasing it.
Installing and connecting a Series 2332 Access Point 45
Figure
20.
To prevent possible damage to the AP, make sure the device is fully
Nortel WLAN Series 2332 Access Point Installation Guide
Figure 19 on page
45.