Nortel 2332 Installation Manual page 38

38 Installing and connecting a Series 2332 Access Point
Figure 6. Step 4—Installing a T-bar Clamp
T-bar
5
Unlock the universal mounting bracket from the AP by inserting the 3-mm or 1/8-inch screwdriver into
the Unlock hole on the AP as shown in
Caution!
components, do not use excessive force when inserting a tool into the Unlock or
Lock hole.
Figure 7. Step 5—Unlocking the Bracket
6
Remove the bracket as shown in
NN47250-302 (324136-A Version 01.03)
T-bar clamp halves
Figure
To avoid damage to the AP's lock mechanism or electronic
Figure 8 on page
Slide together
7.
39.