Nortel 2332 Installation Manual page 50

50 Installing and connecting a Series 2332 Access Point
a
Insert a drywall anchor into each hole, up to the beginning of the threads on the anchor.
b
Screw each anchor the rest of the way into its hole using a #2 Phillips-head screwdriver.
c
Remove the screw from each anchor and save the screw(s) for
3
Unlock the universal mounting bracket from the AP by inserting the 3-mm or 1/8-inch screwdriver into
the Unlock hole on the AP as shown in
Caution!
components, do not use excessive force when inserting a tool into the Unlock or
Lock hole.
Figure 25. Step 3—Unlocking the Bracket
4
Remove the bracket as shown in
Figure 26. Step 4—Removing the Bracket
NN47250-302 (324136-A Version 01.03)
Figure 25 on page
To avoid damage to the AP's lock mechanism or electronic
Figure 26.
step 6 on page 51.
50.