Configuring Supplicant Response Timeout - Nortel Secure 4134 Configuration

Procedure steps
Step
1
2
3
4
Configuring supplicant response timeout
Set the supplicant response timeout. The default is 30 seconds.
Procedure steps
Step
1
2
3
4
Copyright © 2007, Nortel Networks
.
Action
To enter configuration mode, enter:
configure terminal
To specify the Ethernet interface to configure, enter:
interface ethernet <slot/port>
To specify 802.1x configuration, enter:
dot1x
To configure the authentication server timeout, in seconds, enter:
server-timeout <1-65535>
Action
To enter configuration mode, enter:
configure terminal
To specify the Ethernet interface to configure, enter:
interface ethernet <slot/port>
To specify 802.1x configuration, enter:
dot1x
To configure the supplicant response timeout, in seconds, enter
supplicant-timeout <1-65535>
Nortel Secure Router 4134
Security — Configuration and Management
NN47263-600 01.02 Standard
10.0 3 August 2007
Configuring 802.1x on an Ethernet interface 213
—End—
—End—