Configuring A Site-To-Site Ipsec Vpn; Configuring Sr4134 1 - Nortel Secure 4134 Configuration

238 Configuration examples
Configuring a Site-to-site IPsec VPN
The following figure shows a site-to-site VPN configuration.
Figure 20
Site-to-site VPN example
To configure the VPN shown in the preceding figure, perform the following
steps.
Configuring SR4134 1
Step
1
2
3
Copyright © 2007, Nortel Networks
.
Action
To configure the wan1 PPP bundle, enter:
interface bundle wan1
link t1 1/1-2
encapsulation ppp
ip address 205.1.1.14 30
crypto untrusted
exit
To configure the Ethernet port 0/1, enter:
interface ethernet 0/1
ip address 10.1.2.1 24
crypto trusted
exit
To configure the IKE policy, enter:
Nortel Secure Router 4134
Security — Configuration and Management
NN47263-600 01.02 Standard
10.0 3 August 2007