Configuring The Ike Policy Remote Id; Configuring The Ike Mode - Nortel Secure 4134 Configuration

120 IPsec VPN configuration
Variable
email-id <email>
der-encoded-dn
<name>
Configuring the IKE policy remote ID
Configure the remote ID to specify the IPsec peer that participates in the
IKE negotiation.
Procedure steps
Step
1
2
3
4
Table 45
Variable definitions
Variable
domain-name <fqdn>
email-id <email>
der-encoded-dn
<name>
Configuring the IKE mode
Configure the IKE mode for the policy. The default mode is main mode.
Copyright © 2007, Nortel Networks
.
Value
Specifies a fully-qualified email user name string,
like name@router.com.
Specifies the x.500 (LDAP) distinguished name.
Action
To enter the configuration mode, enter:
configure terminal
To specify crypto configuration for IPsec and IKE, enter:
crypto
To specify the IKE policy to configure, enter:
ike policy <policy-name> <peer-address>
To configure the remote ID, enter:
remote-id {domain-name <fqdn> | email-id <email>|
der-encoded-dn <name>}
Value
Specifies a fully qualified domain name (FQDN), like
router.com.
Specifies a fully-qualified email user name string,
like name@router.com.
Specifies the x.500 (LDAP) distinguished name.
Nortel Secure Router 4134
Security — Configuration and Management
NN47263-600 01.02 Standard
10.0 3 August 2007
—End—