210 Authentication, Authorization, and Accounting configuration
Configuring the maximum failed requests
Set the maximum of failed EAP requests sent to the supplicant. The default
is 2.
Procedure steps
Step
1
2
3
4
Configuring port control
Configure a forced 802.1x state for a port.
Procedure steps
Step
1
2
3
4
Copyright © 2007, Nortel Networks
.
Action
To enter configuration mode, enter:
configure terminal
To specify the Ethernet interface to configure, enter:
interface ethernet <slot/port>
To specify 802.1x configuration, enter:
dot1x
To set the maximum failed requests value, enter:
max-req <1-10>
Action
To enter configuration mode, enter:
configure terminal
To specify the Ethernet interface to configure, enter:
interface ethernet <slot/port>
To specify 802.1x configuration, enter:
dot1x
To configure a forced 802.1x state for the port, enter:
[no] port-control {auto | force-authorized |
force-unauthorized}
Nortel Secure Router 4134
Security — Configuration and Management
NN47263-600 01.02 Standard
10.0 3 August 2007
—End—
—End—