Configuring Tunnel Sequencing; Configuring Tunnel Parameters; Configuring Path Mtu Discovery For Tunnel Packets - Nortel Secure 4134 Configuration

186 GRE and IPIP tunnel configuration
Table 93
Variable definitions
Variable
<0-4294967295>
Configuring tunnel sequencing
Configure sequencing to enable dropping of out-of-order packets on the
tunnel.
The default mode for this feature is disabled. This feature is available only in
the GRE mode.
Procedure steps
Step
1
2
3
Configuring tunnel parameters
Configuring path MTU discovery for tunnel packets
Enable or disable path MTU discovery on the tunnel. The default mode
for this feature is disabled.
Procedure steps
Step
1
2
3
Copyright © 2007, Nortel Networks
.
Value
Specifies the key value.
Action
To enter configuration mode, enter:
configure terminal
To specify the name of the tunnel to configure, enter:
interface tunnel <tunnel-name>
To configure tunnel sequence, enter:
[no] tunnel sequence
Action
To enter configuration mode, enter:
configure terminal
To specify the name of the tunnel to configure, enter:
interface tunnel <tunnel-name>
To enable or disable path MTU discovery, enter:
Nortel Secure Router 4134
Security — Configuration and Management
NN47263-600 01.02 Standard
10.0 3 August 2007
—End—