Configuring A Simple Pat Policy - Nortel Secure 4134 Configuration

8
9
10
11
Configuring a simple PAT policy
The following figure shows a simple PAT policy.
Figure 16
Simple PAT policy
To configure the simple PAT policy shown, perform the following steps.
Procedure steps
Step
1
2
Copyright © 2007, Nortel Networks
.
To add an interface to the trusted zone, enter:
interface ethernet0/1
exit
To create the trusted DMZ zone, enter:
firewall dmz
To add an interface to the DMZ zone, enter:
interface ethernet0/2
To define a policy for allowing HTTP traffic into a DMZ web server,
enter:
policy 100 in service http address any any 47.1.1.1 32
Action
To enter the configuration mode, enter:
configure terminal
To specify crypto configuration for IPsec and IKE, enter:
crypto
Nortel Secure Router 4134
Security — Configuration and Management
NN47263-600 01.02 Standard
10.0 3 August 2007
Configuring a simple PAT policy 233
—End—