Configuring Tunnel Ttl; Nortel Secure Router; Shutting Down A Tunnel - Nortel Secure 4134 Configuration

Table 96
Variable definitions
Variable
<0-255>
[no]
Configuring tunnel TTL
Configure the time-to-live (TTL) value for the tunnel interface. The default
value is 30 seconds.
Procedure steps
Step
1
2
3

Shutting down a tunnel

Shut down the tunnel interface.
Procedure steps
Step
1
2
3
Copyright © 2007, Nortel Networks
.
Value
The ToS for the tunnel.
Sets the ToS value to the default, which is 0 (no
ToS).
Action
To enter configuration mode, enter:
configure terminal
To specify the name of the tunnel to configure, enter:
interface tunnel <tunnel-name>
To configure tunnel TTL, enter:
[no] tunnel ttl <1-255>
Action
To enter configuration mode, enter:
configure terminal
To specify the name of the tunnel to configure, enter:
interface tunnel <tunnel-name>
To configure tunnel TTL, enter:
[no] shutdown

Nortel Secure Router 4134

Security — Configuration and Management
NN47263-600 01.02 Standard
10.0 3 August 2007
Configuring tunnel parameters 189
—End—