Nortel Secure 4134 Configuration page 92

92 Firewall and NAT configuration
Table 24
Variable definitions
Variable
0-65535
{tcp | udp | tcp-reset
| icmp | ftp-inactivity |
dns-inactivity}
Configuring service record timer
Configures a timeout for a service record.
Procedure steps
Step
1
2
3
4
Copyright © 2007, Nortel Networks
.
Value
Specifies the timeout in seconds.
tcp: Specifies the Transport Control Protocol
timeout.
udp: Specifies the User Datagram Protocol timeout.
tcp-reset: Specifies the Transport Control Protocol
reset timeout.
icmp: Specifies the Internet Control Message
Protocol timeout.
ftp-inactivity: Specifies how long the File Transport
Protocol waits for a response before timing out.
dns-inactivity: Specifies how long the Domain Name
Service waits for a response before timeout.
Action
To enter configuration mode, enter:
configure terminal
To specify global firewall configuration, enter:
firewall global
To specify timeout configuration, enter:
timeout
To configure service record timers , enter:
service <service-name> {tcp | udp} <port-number>
<0-65535>
Nortel Secure Router 4134
Security — Configuration and Management
NN47263-600 01.02 Standard
10.0 3 August 2007
—End—
—End—