Handset 6140 - Nortel 6120 Fundamentals

With the Administration Console, you can connect to the handset, configure
and change the password, retrieve error messages, update handset
firmware, and update the Handset Administration Tool software.
With the Handset Settings Editor, you can configure handsets and create,
save and copy Admin menu options. For more information about using the
Handset Settings Editor, see
The Handset Administration Tool uses indicators to alert you to the status of
the action being performed:
•
•
•
•
•
A prompt line at the bottom of the window provides information about what
action to take or the status of the utility.
To connect the handset, follow the steps in
WLAN Handset 6120/6140 or WLAN Handset 6140" (page
Procedure 17
Connecting to the WLAN Handset 6120/6140 or WLAN Handset 6140
Step
1
2
3
Copyright © 2007, Nortel Networks
.
Handset Administration Tool for the WLAN Handset 6120/6140 63
Green—the adjacent label is true and this state is desirable or required.
Yellow—the adjacent label is true and this state requires caution or
attention. For example, a yellow New folder indicator cautions that the
file path is to be created. A yellow File exists indicator cautions that
the file is to be overwritten.
Red—the adjacent label is true and this state is undesirable or is
accompanied by an error. A message, on the prompt line or in a dialog
box, describes the nature of the error.
Gray—the adjacent label is not true, for example, the handset is not
connected.
Blinking—file status indicators blink yellow when the file status is being
queried but is not yet known (for example: when attempting to access
slow drives or unresponsive network devices). File status indicators
blink red when the path is invalid (mistyped). The Handset indicator
blinks when the handset password must be entered.
Action
In the Handset Administration Tool, select the Connect tab.
Power off the handset and insert it into the Dual Charger.
Type the password.
You must enter a password the first time you insert the handset.
The default password is 123456.
Nortel Communication Server 1000
WLAN Handsets Fundamentals
NN43001-505 01.04 Standard
Release 5.0 4 September 2007
"Admin menu settings" (page
Procedure 17 "Connecting to the
66).
63).