Push-To-Talk; Wlan Handset 6120/6140 Configuration Menu - Nortel 6120 Fundamentals

84 WLAN Handset configuration

Push-to-Talk

From the Push-to-Talk menu, you can enable or disable the PTT feature
locally. You can also configure the channel, tone volume and audio volume.
The menu for Push-to-Talk does not appear if PTT is disallowed on the
Admin menu or if no channel is enabled on the Admin menu.
If PTT is allowed in the Admin menu and enabled by the user, standby time is
decreased to 30 hours.
For detailed information about the user-defined preferences in the Standby
menu and how to configure them, see WLAN Handset 2210 User Guide
(NN10300-077), WLAN Handset 2211 User Guide (NN10300-078), and
WLAN Handset 2212 User Guide (NN10300-071).
WLAN Handset 6120/6140 Configuration menu
You can configure user-defined preferences from the Configuration menu.
The wireless handset must be in contact with the system, no error messages
displayed, and in Standby mode. For more information, see
"Configuration menu" (page
With the handset in the standby state, press the Cfg softkey to open the
standby menu.
Table 10
Configuration menu
2nd level
Config
menu
Lock
Keys
User Silent
Profiles Vibrate
Loud
Soft
Custom
Copyright © 2007, Nortel Networks
.
ATTENTION
84). An asterisk (*) indicates the default value.
3rd level 4th level
Set as
Active
Ring Telephone
Settings
Nortel Communication Server 1000
WLAN Handsets Fundamentals
NN43001-505 01.04 Standard
Release 5.0 4 September 2007
Table 10
5th level 6th level
Ring Off
Cadence PBX
Continuous
Short Pulse
Long Pulse
Ring Tones
Tone 1–10