Run Site Survey For The Wlan Handset 6120/6140 - Nortel 6120 Fundamentals

134 Troubleshooting
i:bbbbb sn ch bcn
eeeeeeeeeee DGHI
rrrrrrrrrrrrr+xxxx
mmm G:gggg P:pppp
Any
where
i = index of selected AP (range: 0-3)
bbbbb = last three octets of the ESSID for a discovered AP
sn = signal strength in -dBm
ch = channel
bcn = beacon interval
eeeeeeeeeee = ESSID (up to first 11 characters)
DGHI = standards supported
rrrrr = rates supported (example: 1b2b5b11b)
+ = more rates supported than displayed
xxxx = WMM or UPSD if supported
mmmm = security mode
G:gggg = group key security
P:pppp = pair-wise key security
Any = soft key to toggle between single and multiple ESSID mode
Smry = soft key to return to summary display

Run Site Survey for the WLAN Handset 6120/6140

Site Survey is used to evaluate the facility coverage before certifying that an
installation is complete. It can also be used at any time to evaluate coverage
by testing signal strength, to gain information about an AP, and to scan
an area to look for all APs, regardless of SSID. The information available
through Site Survey includes:
•
•
•
•
When Run Site Survey begins, it is in single SSID mode. Press the Any
soft key to switch to all APs (regardless of SSID) mode; the Any soft key
changes to MyID. The display looks like the following in multiple AP mode:
Copyright © 2007, Nortel Networks
.
SSID
beacon interval
information regarding support of various protocols and standards, as
required
current security configuration
Nortel Communication Server 1000
WLAN Handsets Fundamentals
NN43001-505 01.04 Standard
Release 5.0 4 September 2007
Smry