118 Admin menu options
Message type
Call start or end
Audio error threshold exceeded Yes
Audio stats
Radio error threshold exceeded Yes
Radio stats
For more information, see
Error Handling Mode
The Halt on Error option causes the handset to stop operating if an error
message is received. Unless the error is a fatal one, normal operation can
be resumed by power cycling the handset. Press START or remove and
replace the Battery Pack. The Restart On Error option causes the handset
to make every effort to reboot quietly and quickly to standby mode. In either
scenario, a call in progress is lost.
Error detail can be captured by the Syslog Server and can also be available
for downloading with the Handset Administration Tool.
Restore Defaults
The Restore Defaults option restores all user and administrative parameters,
except Telephony Protocol, to the factory default configurations. For more
information, see
Copyright © 2007, Nortel Networks
.
Errors
No
No
No
"Syslog Mode" (page
Appendix "Factory Defaults" (page
Nortel Communication Server 1000
WLAN Handsets Fundamentals
NN43001-505 01.04 Standard
Release 5.0 4 September 2007
Events
Full
Yes
Yes
Yes
Yes
No
Yes (every 5 s)
Yes
Yes
No
Yes (every 5 s)
139).
169).