Nortel 6120 Fundamentals page 135

111111 -22 33
111111 -22 33
111111 -22 33
111111 -22 33
MyID
where
111111 = last three octets of the SSID for the discovered AP
22 = signal strength of the specified AP
33 = channel number of the specified AP
4444 = DTIM interval configured for the specified AP
MyID = soft key to toggle between single and any SSID mode
Detl = soft key to toggle between summary and detail screens
The following display shows three APs configured with an SSID that
matches that of the handset. The first has a signal strength of –28dBm, and
is configured on channel 2 with a beacon interval of 100 ms. The second
has a signal strength of –48dBm, and is configured on channel 6 with a
beacon interval of 200 ms. The third has a signal strength of –56dBm and is
configured on channel 11 with a beacon interval of 100 ms.
ab7bc8 -28 02
2ae578 -48 06
2ae596 -56 11
Any
When you select any Any SSID mode, the summary display contains the
first six characters of the APs SSID instead of the beacon interval, as shown
in the following example.
Copyright © 2007, Nortel Networks
.
444
444
444
444
Detl
Nortel Communication Server 1000
WLAN Handsets Fundamentals
NN43001-505 01.04 Standard
Release 5.0 4 September 2007
Diagnostic Tools 135
100
200
100
Detl