Use The Configuration Cradle And Software; Procedure 8 Installing And Configuring The Configuration Cradle - Nortel 6120 Fundamentals

Procedure 8
Installing and configuring the Configuration Cradle
Step
1
2
3
4
5
6
7
8
9
10
11
12
13
Use the Configuration Cradle and software
The cradle contains two slots, one for the WLAN Handset 2210 and WLAN
Handset 2212 and the other for the WLAN Handset 2211. For more
information, see
Copyright © 2007, Nortel Networks
.
Configuration Cradle for the WLAN Handset 2210/2211/2212 49
Action
On the PC, create a folder for the software.
Using a Web browser, connect to www.nortel.com/support.
Locate the entry for the NetLink Configuration Cradle.
Click the product link and save the Configuration Cradle.exe file to
the folder created in
(Optional) Copy the release notes to the folder created in
Double-click on the Configuration Cradle.exe file to install the
software, putting the files into the folder created in
The tool does not require any additional installation and does not
show up in the Programs menu or in the Windows registry.
(Optional) To aid in locating the tool quickly, create a shortcut on the
computer desktop to the PhoneConfig.exe file.
Place the cradle on a flat horizontal surface and plug the power
supply into the cradle and into an appropriate power outlet.
Connect the cradle, using a serial cable with a DB-9 connector, to
one of the COM ports of the PC.
Double-click the PhoneConfig.exe file or the shortcut created in
7.
From the menu at the top of the Config Cradle screen, select
Settings > COM port.
Enter the port number of the COM port that the cradle is uses.
Press OK.
Note: If software updates are required, overwrite the installed files with
the new files. The existing configuration files are retained.
Figure 2 "Configuration Cradle" (page
Nortel Communication Server 1000
WLAN Handsets Fundamentals
NN43001-505 01.04 Standard
Release 5.0 4 September 2007
Step 1.
—End—
Step 1.
Step 1.
Step
50). After a handset