Configuration Cradle For The Wlan Handset 2210/2211/2212; Install And Configure The Configuration Cradle - Nortel 6120 Fundamentals

48 WLAN Handset configuration
•
For more information,
Handset 2210/2211/2212" (page 93)
for the WLAN Handset 6120/6140" (page
Configuration Cradle for the WLAN Handset 2210/2211/2212
The Configuration Cradle is an optional accessory. It is designed to
automate the configuration of the wireless handsets.
The cradle is connected to a personal computer (PC) through one of the
communication (COM) ports. You can download the software for the PC
from www.nortel.com/support. The software is installed on the PC and
configured to read from the COM port.
You can configure only one handset at a time.
Nortel does not recommend the use of adapters or port replicators because they
do not properly handle the communications between the cradle and the PC.
Personal computer requirements
The software runs on Windows NT, Windows 2000, and Windows XP.
Configuration Cradle safety notes
•
•
•
•
•
•
•
Install and configure the Configuration Cradle
Follow the steps in
Cradle" (page 49)
PC.
Copyright © 2007, Nortel Networks
.
Call server 2 port
seeTable 14 "Admin menu options for the WLAN
Do not expose to freezing temperatures or sunlight. The Configuration
Cradle operating environment is between 50 to 85 degrees F (10 to
30 degrees C) .
Use only the original Nortel plug-in power adapter.
Place only one phone in the cradle at a time.
Do not place a phone in the cradle with a battery installed.
Do not immerse the cradle in water or other liquid.
Do not pour liquids into the telephone slots.
Only use Nortel telephones in the Configuration Cradle. Do not place
anything in the cradle other than the WLAN Handsets 2210/2211/2212,
or you can damage the contacts. The cradle cannot work correctly with
damaged contacts.
Procedure 8 "Installing and configuring the Configuration
to install and configure the Configuration Cradle on the
Nortel Communication Server 1000
WLAN Handsets Fundamentals
NN43001-505 01.04 Standard
Release 5.0 4 September 2007
and Table 16 "Admin menu options
107).
ATTENTION