Handset Asleep (Save Battery Mode); Handset Asleep Mode Feature Conditions - Nortel T7406 Installation Manual

Messages
Page - General
Page - Internal
Page - External
Page - Internal/External
Ring Again *
Transfer
Voice Call
Notes: In sleep mode, the user receives visual indication only. There is
*
no beep tone indication.
Memory buttons store telephone numbers or feature codes to give you one-touch dialing or feature
activation. For more information about memory buttons, refer to

Handset Asleep (Save Battery Mode)

When the handset is idle for longer than 15 seconds, it automatically goes into Handset Asleep
mode to conserve the battery. Incoming calls automatically wake up the handset from the Handset
Asleep mode. Pressing any button on the dialpad also wakes up the handset.

Handset Asleep Mode Feature Conditions

If the handset is in Handset Asleep mode, the following features are affected:
• To receive Message Waiting Indication (MWI) when the handset is in Handset Asleep mode,
press any button on the dialpad to wake up the handset.
• If the Ring Again feature is active, and the handset goes into Handset Asleep mode, there is no
indication of the Ring Again feature until you press a button on the dialpad to wake up the
handset. To use the Ring Again feature, press any button on the dialpad to wake up the
handset.
Note: When the handset is awake, the Ring Again feature provides both an audio
and a visual indication that the feature is active.
• If the Do not disturb (DND) feature is active when the handset is in Handset Asleep mode,
there will be no visual notification of incoming calls, including Priority calls.
Priority calls when DND is active: When the handset is in Handset Asleep mode and a Priority
call is made to the T7406, it appears to the caller that the Priority Call was successfully connected,
even though you receive no indication on your T7406 handset. As soon as you wake the handset,
whenever you have DND set, you must always press the line or intercom button and the ®
button. This ensures that your handset provides proper audible and visual Ring Notification.
Chapter 3 Using the Handset Display Buttons
≤⁄
≤fl‚
≤fl⁄
≤fl¤
≤fl‹
≤¤
≤‡‚
≤flfl
"Memory buttons" on page
T7406 Cordless Handset Installation Guide
35
33.