Flanger) - Roland SH-4d Owner's Manual

MFX Parameters
SBF-325 (Flanger)
This effect reproduces Roland's SBF-325 analog flanger.
It provides three types of flanging effect (which adds a metallic resonance to the original sound) and a chorus-type effect.
Parameter Value
Types of flanging effect
FL1
Mode FL2
FL3
CHO
OFF, ON
Rate Sync
0.02–5.00
Rate
[Hz]
Rate Note Note(P.167)
Depth 0–127
Manual 0–127
0–127
Feedback
NORM, INV
RMod
Phase
L Phase NORM, INV
NORM, INV
R Phase
Level 0–127
106
A typical mono flanger
A stereo flanger that preserves the stereo positioning of the original sound
A cross-mix flanger that produces a more intense effect
A chorus effect
If this is ON, the rate synchronizes with the tempo of the rhythm.
Tempo (Pattern)
Tempo (System)(P.76)
Modulation frequency of the flanger effect
Modulation depth of the flanger effect
Center frequency at which the flanger effect is applied
Amount by which the flanging effect is boosted
If Mode is CHO, this setting is ignored.
Phase of the right channel modulation:
Normally, you will leave this at Normal (NORM).
If you specify Inverted (INV), the modulation (upward/downward movement) of the right channel
is inverted.
Phase when mixing the flanging sound with the original sound
NORM: normal phase
INV: inverse phase
Output Level
Explanation