Configuring The System Eq And System Comp Settings (System Eq/System Comp) - Roland SH-4d Owner's Manual

Configuring the System EQ and System Comp Settings (SYSTEM EQ/SYSTEM COMP)

Parameter Value
OFF, ON
Switch
In Gain -24–+24 [dB]
Low Gain -24.0–+24.0 [dB]
Mid1 Gain -24.0–+24.0 [dB]
Mid2 Gain -24.0–+24.0 [dB]
Mid3 Gain -24.0–+24.0 [dB]
High Gain -24.0–+24.0 [dB]
Low Freq 20–16000 [Hz]
Mid1 Freq 20–16000 [Hz]
Mid2 Freq 20–16000 [Hz]
Mid3 Freq 20–16000 [Hz]
High Freq 20–16000 [Hz]
Mid1 Q 0.5–16.0
0.5–16.0
Mid2 Q
Mid3 Q 0.5–16.0
OFF, ON
Switch
Low Attack 0.1–100 [ms]
Low Release 10–1000 [ms]
-60–0 [dB]
Low Thres
Low Ratio 1:1, 2:1, 3:1, 4:1, 8:1,
16:1, 32:1, INF:1
Low Knee 0–30 [dB]
Low Gain -24–+24 [dB]
Mid Attack 0.1–100 [ms]
Mid Release 10–1000 [ms]
Mid Thres -60–0 [dB]
Mid Ratio 1:1, 2:1, 3:1, 4:1, 8:1,
16:1, 32:1, INF:1
Mid Knee 0–30 [dB]
Mid Gain -24–+24 [dB]
High Attack 0.1–100 [ms]
High 10–1000 [ms]
Release
High Thres -60–0 [dB]
High Ratio 1:1, 2:1, 3:1, 4:1, 8:1,
16:1, 32:1, INF:1
High Knee 0–30 [dB]
High Gain -24–+24 [dB]
Split Freq 16–16000 [Hz]
Low
Split Freq 16–16000 [Hz]
High
SYSTEM EQ
Turns SYSTEM EQ on/off.
Adjusts the amount of boost/cut for the input to the EQ.
Adjusts the boost/cut of the low frequency range.
Adjusts the amount of boost/cut of the mid-frequency range 1.
Adjusts the amount of boost/cut of the mid-frequency range 2.
Adjusts the amount of boost/cut of the mid-frequency range 3.
Adjusts the boost/cut of the high frequency range.
Sets the center frequency of the low range.
Sets the center frequency of the mid range 1.
Sets the center frequency of the mid range 2.
Sets the center frequency of the mid range 3.
Sets the center frequency of the high range.
Sets the bandwidth of the mid-frequency range 1.
Higher values make the bandwidth narrower.
Sets the bandwidth of the mid-frequency range 2.
Higher values make the bandwidth narrower.
Sets the bandwidth of the mid-frequency range 3.
Higher values make the bandwidth narrower.
SYSTEM COMP
Turns SYSTEM COMP on/off.
Specifies the time from when the input exceeds Low Thres until compression is applied to
the volume of the low-frequency band.
In a state when compression is already being applied, this specifies the time from when the
input decreases below Low Thres until the low-frequency band stops being compressed.
Specifies the volume level at which compression starts for the low-frequency band.
Specifies the compression ratio for the low-frequency band.
This function smooths out the sonic transition, from when the compression is not engaged
until when the compression begins.
This gradually applies compression from just before the Low Thres point.
Higher values produce a smoother transition.
Specifies the output volume of the low-frequency band.
Specifies the time from when the input exceeds Mid Thres until compression is applied to
the volume of the mid-frequency band.
In a state when compression is already being applied, this specifies the time from when the
input decreases below Mid Thres until the mid-frequency band stops being compressed.
Specifies the volume level at which compression starts for the mid-frequency band.
Specifies the compression ratio for the mid-frequency band.
This function smooths out the sonic transition, from when the compression is not engaged
until when the compression begins.
This gradually applies compression from just before the Mid Thres point.
Higher values produce a smoother transition.
Specifies the output volume of the mid-frequency band.
Specifies the time from when the input exceeds High Thres until compression is applied to
the volume of the high-frequency band.
In a state when compression is already being applied, this specifies the time from when the
input decreases below High Thres until the high-frequency band stops being compressed.
Specifies the volume level at which compression starts for the high-frequency band.
Specifies the compression ratio for the high-frequency band.
This function smooths out the sonic transition, from when the compression is not engaged
until when the compression begins.
This gradually applies compression from just before the High Thres point.
Higher values produce a smoother transition.
Specifies the output volume of the high-frequency band.
Specifies the frequency at which the low-frequency band (Low) and mid-frequency band
(Mid) are divided.
Specifies the frequency at which the high-frequency band (High) and mid-frequency band
(Mid) are divided.
Explanation
Main Menu (MENU)
79