Pshifter (2 Voice Pitch Shifter) - Roland SH-4d Owner's Manual

Table of Contents

Advertisement

2V PShifter (2 Voice Pitch Shifter)
Shifts the pitch of the original sound.
This 2-voice pitch shifter has two pitch shifters, and can add two pitch shifted sounds to the original sound.
Parameter
Value
P1Coarse
-24–+12 [sem]
P1 Fine
-100–+100
OFF, ON
P1 Dly Sync
P1D.Time
1–1300
P1DRate Nt
Note(P.167)
-98–+98 [%]
P1 Feedback
P1 Pan
L64–63R
P1 Level
0–127
P2Coarse
-24–+12 [sem]
P2 Fine
-100–+100
OFF, ON
P2 Dly Sync
P2D.Time
1–1300
P2DRate Nt
Note
P2 Feedback -98–+98 [%]
P2 Pan
L64–63R
P2 Level
0–127
Low Gain
-15–+15 [dB]
High Gain
-15–+15 [dB]
Balance
D100: 0W–D0: 100W
Level
0–127
Adjusts the pitch of Pitch Shift 1 in semitone steps.
Adjusts the pitch of Pitch Shift Pitch 1 in 2-cent steps.
If this is ON, the rate synchronizes with the tempo of the rhythm.
Tempo (Pattern)
Tempo
(System)(P.76)
Adjusts the delay time from the direct sound until the Pitch Shift 1 sound is heard.
Adjusts the proportion of the pitch shifted sound that is fed back into the effect.
Negative (-) settings will invert the phase.
Stereo location of the Pitch Shift 1 sound
Volume of the Pitch Shift 1 sound
Settings of the Pitch Shift 2 sound.
The parameters are the same as for the Pitch Shift 1 sound.
Amount of boost/cut for the low-frequency range
Amount of boost/cut for the high-frequency range
Volume balance between the direct sound (D) and the pitch shifted sound (W)
Output Level
Explanation
MFX Parameters
147

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents