Bpm Looper - Roland SH-4d Owner's Manual

BPM Looper

Loops a short portion of the input sound.
This can automatically turn the loop on/off in synchronization with the rhythm.
Parameter Value
230–23 (not
Length
straight)
OFF, ON
Rate Sync
Rate 0.05–10.00 [Hz]
Rate Note Note(P.167)
1–8
Timing
1–8
Lenth
OFF, AUTO, ON
Loop
Mode
Level 0–127
Specifies the length of the loop.
If this is ON, the rate synchronizes with the tempo of the rhythm.
Tempo (Pattern)
Tempo (System)(P.76)
Cycle at which the loop automatically turns on/off
Specifies the timing within the cycle at which the loop automatically starts (which step of the
eight timing divisions at which the sound is heard).
Specifies the length at which the loop automatically ends within the cycle (the number of times
that the 1/8-length of sound is heard).
If this is AUTO, the loop automatically turns on/off in synchronization with the rhythm.
* If the effect is recalled with this ON, this parameter must first be set to something other
than ON in order to make the loop operate.
Output Level
Explanation
MFX Parameters
143