Roland SH-4d Owner's Manual page 29

Parameter Controllers
Osc 1–3 SHIFT+TIMBRE
Pulse Width
Osc 1 Level [OSC 1] slider
Osc 2 Level [OSC 2] slider
Osc 3 Level [OSC 3] slider
Osc 1–3 Fat –
Osc 1-2 Sync –
Osc 1–3 –
SSaw
Detune
Osc 1–3 LED –
Color
LFO 2
LFO 2 Rate [OSC 4] slider
Note/Rate
LFO 2 Pitch PITCH (when LFO
Depth 2 is selected)
TIMBRE (when
LFO 2 Fade
LFO 2 is selected)
LFO 2 Type –
LFO 2 Rate –
Sync
LFO 2 Key –
Trig
LFO 2 Flt –
Depth
LFO 2 Amp –
Depth
LFO 2 Pan –
Depth
Value
0–63
0–127
0–127
0–127
0–63
OFF, ON
0–127
RED, ORANGE, YELLOW, GREEN, BLUE, PURPLE,
PINK, WHITE, SKYBLUE, P.YELLOW, P.BLUE,
P.PINK, L.RED, L.ORANGE, L.YELLOW, L.GREEN,
P.GREEN, L.SKYBLUE, L.BLUE, L.PURPLE
0–1023 or 1/64T, 1/64, 1/32T, 1/32, 1/16T, 1/32.,
1/16, 1/8T, 1/16., 1/8, 1/4T, 1/8., 1/4, 1/2T, 1/4.,
1/2, 1T, 1/2., 1, 2T, 1., 2, 4
0–100
0–1023
Sets the LFO 2 waveform.
SINE
TRI
SAW-UP
SAW-DW
SQR
RND
TRP
S&H
CHS
VSINE
OFF, ON
OFF, ON
0–100
0–100
-63–+63
Explanation
This effect changes the duty ratio of the
pulse width to alter the waveform.
You can use this effect with other
waveforms besides SQR (square wave).
* A value of zero results in a 50:50%
duty ratio.
Sets the volume of OSC 1.
Sets the volume of OSC 2.
Sets the volume of OSC 3.
Distorts the waveform and adds a
frequency component one octave lower
than the original waveform.
Produces an oscillator sync effect that's
found in analog synthesizers and other
sound generators.
Resets OSC 1 using the pitch cycle of OSC 2
(only for OSC 1 and 2).
Adjusts how much the SuperSAW is
detuned.
Larger values create a greater detune
effect.
* This is enabled only when "SSAW" is
selected for the waveform.
Sets the oscillator section LED color for
each oscillator.
Sets the speed of the LFO 2 cycle.
The LFO 2 cycle (rate) is set as a note
length when the LFO2 Rate Sync setting is
"ON".
Sets the depth of LFO 2 when it is applied
to the pitch.
Sets how long it takes for LFO 2 to reach
maximum amplitude.
Sine wave
Triangle wave
Sawtooth wave
Sawtooth wave (negative polarity)
Square wave
Random wave
Trapezoidal wave
Sample & hold wave (randomly changes
the output value once per cycle).
Chaos wave
Deformed sine wave (randomly changes
the amplitude of the sine wave once per
cycle).
Turn this ON to sync the LFO 2 cycle with
the tempo.
Sets whether to synchronize the start of
the LFO 2 cycle with the timing you use to
play the keys ("ON" to synchronize, "OFF"
to disable).
Sets the depth of LFO 2 when it is applied
to the cutoff frequency.
Sets how much LFO 2 affects the volume.
Sets the depth of the LFO 2 when it is
applied to the pan setting.
Creating a Tone
29