Phonograph - Roland SH-4d Owner's Manual

Phonograph

Recreates the sound of an analog record being played on a record player.
This lets you simulate the unique noises produced when a record is played, as well as the variations that occur when the record
spins.
Parameter
Signal Dist 0–127
0–127
Frequency Range
LP, EP, SP
Disc Type
Scratch NZ Lev 0–127
Dust NZ Lev 0–127
Hiss NZ Lev 0–127
Total NZ Lev 0–127
Wow 0–127
Flutter 0–127
Random 0–127
Total W/F 0–127
Balance D100: 0W-D0: 100W Sets the volume balance between the original sound (D) and the effect sound (W).
Level 0–127
Value
Sets the amount of distortion.
Sets the frequency characteristics of the playback system.
Smaller values create the feeling of an older system with narrow frequency bands.
Sets the turntable rotation speed.
This has an effect on the scratch noise cycle.
Sets the volume of noise created by scratches in the record.
Sets the volume of noise created by dust on the record.
Sets the volume of continuous hiss noise.
Sets the volume of noise overall.
Sets the amount of variation in record spin (long cycle).
Sets the amount of variation in record spin (short cycle).
Sets the amount of non-cyclical variation in record spin.
Sets the volume of variation in record spin overall.
Sets the output volume.
Explanation
MFX Parameters
145