Vlan Ingressfilter; Vlan Makestatic - NETGEAR ProSafe FSM7326P Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
6.1.4.1 no vlan acceptframe
This command sets the frame acceptance mode per interface to Admit All. For Admit All
mode, untagged frames or priority frames received on this interface are accepted and
assigned the value of the interface VLAN ID for this port. With either option, VLAN
tagged frames are forwarded in accordance with the IEEE 802.1Q VLAN Specification.
Format
Mode

6.1.5 vlan ingressfilter

This command enables ingress filtering. If ingress filtering is disabled, frames received
with VLAN IDs that do not match the VLAN membership of the receiving interface are
admitted and forwarded to ports that are members of that VLAN.
Default
Format
Mode
6.1.5.1 no vlan ingressfilter
This command disables ingress filtering. If ingress filtering is disabled, frames received
with VLAN IDs that do not match the VLAN membership of the receiving interface are
admitted and forwarded to ports that are members of that VLAN.
Format
Mode

6.1.6 vlan makestatic

This command changes a dynamically created VLAN (one that is created by GVRP
registration) to a static VLAN (one that is permanently configured and defined). The ID is
a valid VLAN identification number. VLAN range is 2-4094.
Format
Mode
VLAN Commands
vlan acceptframe {vlanonly | all}
Interface Config
disabled
vlan ingressfilter
Interface Config
no vlan ingressfilter
Interface Config
vlan makestatic <2-4094>
VLAN Config
v1.0, March 2006
6-3