Show Mac-Address-Table Static; Show Mac-Address-Table Staticfiltering - NETGEAR ProSafe FSM7326P Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,

4.4.11 show mac-address-table static

This command displays the Static MAC Filtering information for all Static MAC Filters. If
you select
<all>
value for
<macaddr>,
Static MAC Filter information only for that MAC address and VLAN.
Format
Mode
MAC Address
VLAN ID
Source Port(s)
Destination
Port(s)

4.4.12 show mac-address-table staticfiltering

This command displays the Static Filtering entries in the Multicast Forwarding Database
(MFDB) table.
Format
Mode
Mac Address
Type
Description
Interfaces
4-20
, all the Static MAC Filters in the system are displayed. If you supply a
you must also enter a value for
show mac-address-table static {<macaddr> <vlanid>
| all}
Privileged EXEC
Is the MAC Address of the static MAC filter entry.
Is the VLAN ID of the static MAC filter entry.
Indicates the source port filter set's slot and port(s).
Indicates the destination port filter set's slot and port(s).
show mac-address-table staticfiltering
Privileged EXEC
A unicast MAC address for which the switch has forwarding
and or filtering information. The format is 6 or 8 two-digit
hexadecimal numbers that are separated by colons, for exam-
ple 01:23:45:67:89:AB. In an IVL system the MAC address
will be displayed as 8 bytes.
Displays the type of the entry. Static entries are those that are
configured by the end user. Dynamic entries are added to the
table as a result of a learning process or protocol.
The text description of this multicast table entry.
The list of interfaces that are designated for forwarding
(Fwd:) and filtering (Flt:).
v1.0, March 2006
, and the system displays
<vlanid>
Port and System Setup Commands