Sntp Server; Show Sntp - NETGEAR ProSafe FSM7326P Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,

4.3.8 sntp server

This command configures an SNTP server (a maximum of three). The optional priority
can be a value of 1-3, the version a value of 1-4, and the port id a value of 1-65535.
Format
Mode
4.3.8.1 no sntp server
This command deletes an server from the configured SNTP servers.
Format
Mode

4.3.9 show sntp

This command is used to display SNTP settings and status.
Format
Mode
Last Update Time
Last Attempt
Time
Last Attempt
Status
Broadcast Count
Multicast Count
4-12
sntp server <ipaddress> [<priority> [<version>
[<portid>]]]
Global Config
no sntp server remove <ipaddress>
Global Config
show sntp
Privileged EXEC
Time of last clock update.
Time of last transmit query (in unicast mode).
Status of the last SNTP request (in unicast mode) or unsolic-
ited message (in broadcast mode).
Current number of unsolicited broadcast messages that have
been received and processed by the SNTP client since last
reboot.
Current number of unsolicited multicast messages that have
been received and processed by the SNTP client since last
reboot
v1.0, March 2006
Port and System Setup Commands