Shutdown All - NETGEAR ProSafe FSM7326P Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
4.1.6.1 no shutdown
This command enables a port.
Note: You can use the
Format
Mode

4.1.7 shutdown all

This command disables all ports.
Note: You can use the
Default
Format
Mode
4.1.7.1 no shutdown all
This command enables all ports.
Note: You can use the
Format
Mode
4-4
no shutdown
(LAG) interfaces, but not on VLAN routing interfaces.
no shutdown
Interface Config
shutdown
interfaces, but not on VLAN routing interfaces.
enabled
shutdown all
Global Config
shutdown
interfaces, but not on VLAN routing interfaces.
no shutdown all
Global Config
v1.0, March 2006
command on physical and port-channel
command on physical and port-channel (LAG)
command on physical and port-channel (LAG)
Port and System Setup Commands