Serial Baudrate; Serial Timeout - NETGEAR ProSafe FSM7326P Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,

3.2.3 serial baudrate

This command specifies the communication rate of the terminal interface. The supported
rates are 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200.
Default
Format
Mode
3.2.3.1 no serial baudrate
This command sets the communication rate of the terminal interface.
Format
Mode

3.2.4 serial timeout

This command specifies the maximum connect time (in minutes) without console activity.
A value of 0 indicates that a console can be connected indefinitely. The time range is 0 to
160.
Default
Format
Mode
3.2.4.1 no serial timeout
This command sets the maximum connect time (in minutes) without console activity.
Format
Mode
3-6
9600
serial baudrate {1200 | 2400 | 4800 | 9600 | 19200
| 38400 | 57600 | 115200}
Line Config
no serial baudrate
Line Config
5
serial timeout <0-160>
Line Config
no serial timeout
Line Config
v1.0, March 2006
Administrative Access Commands