Show Serial - NETGEAR ProSafe FSM7326P Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,

3.2.5 show serial

This command displays serial communication settings for the switch.
Format
Modes
Serial Port Login
Timeout
(minutes)
Baud Rate (bps)
Character Size
(bits)
Flow Control
Stop Bits
Parity Type
Administrative Access Commands
show serial
Privileged EXEC
User EXEC
Specifies the time, in minutes, of inactivity on a Serial port
connection, after which the Switch will close the connection.
Any numeric value between 0 and 160 is allowed, the factory
default is 5. A value of 0 disables the timeout.
The default baud rate at which the serial port will try to con-
nect. The available values are 1200, 2400, 4800, 9600,
19200, 38400,57600, and 115200 baud. The factory default is
9600 baud.
The number of bits in a character. The number of bits is
always 8.
Whether Hardware Flow-Control is enabled or disabled.
Hardware Flow Control is always disabled.
The number of Stop bits per character. The number of Stop
bits is always 1.
The Parity Method used on the Serial Port. The Parity
Method is always None.
v1.0, March 2006
3-7