Configuring The Vpn Client - NETGEAR ProSafe FVS338 Reference Manual
Vpn firewall 50
Hide thumbs
Also See for ProSafe FVS338:
- Reference manual (230 pages) ,
- Application note (5 pages) ,
- Installation manual (2 pages)
Table of Contents
Advertisement
FVS338 ProSafe VPN Firewall 50 Reference Manual
Figure 5-7
Configuring the VPN Client
On a remote PC that has a NETGEAR ProSafe VPN Client installed, configure the client using the
FVS338 VPN Client default parameters (displayed in both the IKE Policy table and the VPN
Policy table of the FVS338 under the name "home"):
•
Local FQDN (the router): fvs_local.com
•
Remote FQDN (the client): fvs_remote.com
•
Encryption Algorithm: 3DES
•
Authentication Algorithm: SHA-1
•
Pre-shared key: 12345678 (defined by user)
•
Diffie-Hellman (DH) Group: Group 2 (1024 bit)
•
SA Life Time: unspecified
•
Remote LAN IP subnet: 192.168.1.0/255.255.255.0
5-14
fvs_remote.com
fvs_local.com
v1.0, September 2006
Virtual Private Networking
Advertisement
Table of Contents
Troubleshooting
