NETGEAR ProSafe FVS338 Reference Manual page 106

FVS338 ProSafe VPN Firewall 50 Reference Manual
Figure 5-9
8. In the left frame, click on My Identity (shown in
9. From the Select Certificate pull-down menu, select None.
10. From the ID Type pull-down menu, select Domain Name.
The value entered under Domain Name will be in the form "<name><XY>.fvs_remote.com",
where each user must use a different variation on the Domain Name entered here. The <name>
is the policy name used in the FVS338 configuration. In this example, it is "home". X and Y
are an arbitrary pair of numbers chosen for each user.
Note: X may not be zero!
In this example, we entered "home11.fvs_remote.com". Up to 25 user variations can be served
by one policy.
11. Leave Virtual Adapter disabled, and select your computer's Network Adapter. Your current IP
address will appear.
5-16
fvs_local.com
Figure
v1.0, September 2006
5-10).
Virtual Private Networking