Step 2: Configuring The Netgear Prosafe Vpn Client On The Remote Pc - NETGEAR FVG318 Reference Manual
Prosafe 802.11g wireless vpn firewall
Hide thumbs
Also See for FVG318:
- Reference manual (204 pages) ,
- Configuration manual (11 pages) ,
- Features manual (11 pages)
Table of Contents
Advertisement
4. Click the VPN Wizard Default Values link on the VPN Wizard screen to display the VPN
default values shown below. The Wizard sets most parameters to defaults as proposed by the
VPN Consortium.
Figure 5-5
5. Click Apply on the VPN Wizard screen to complete the configuration procedure. The VPN
Policies screen will display showing that the new tunnel is enabled.
Figure 5-6
To view or modify the tunnel settings, click Edit.
To enable/disable the tunnel, select the checkbox and click Enable or Disable.
Step 2: Configuring the NETGEAR ProSafe VPN Client on the
Remote PC
This procedure describes how to configure the NETGEAR ProSafe VPN Client. This example
assumes the PC running the client has a dynamically assigned IP address.
Basic Virtual Private Networking
ProSafe 802.11g Wireless VPN Firewall FVG318 Reference Manual
v1.0, September 2007
5-7
Advertisement
Table of Contents
Troubleshooting
